Some common error codes in Electrolux washing machines and how to fix them

Electrolux washing machine error E10

The E10 error is usually caused by:

  • The water supply is too weak, waiting time for the water supply is too long.
  • The water supply hose to the machine is blocked due to being pressed or twisted.
  • The water supply valve does not open.
  • The water supply hose filter is clogged.

How to fix error E10:

  • Use the booster pump to increase the water pressure into the machine.
  • Check the intake manifold connector for kinks or pressure, and then adjust it.
  • Open the water supply valve if forgotten.
  • Clean the water inlet filter element.

Mã lỗi E10

Washing machine error E40

The main cause of E40 error is due to:

  • The door is not closed or is not closed properly, clothes are stuck in the door.
  • The door lock controller chip is faulty.

When you get error E40 you need:

  • Check that the lid of the washing machine is closed tightly, and clothes are not stuck on the door.
  • If the lid is closed and the machine still does not work, you should contact the Service Center.

Máy giặt báo lỗi E40

Washing machine error EHO

EHO error cause:

  • The power supply is unstable, the voltage is too weak.
  • If the washing machine is left in a humid place, rainy weather, or rainy weather (common in the North), an open circuit leads to unstable voltage.

How to fix EHO error:

  • You need to check your home’s power source to see if it is stable or not, use Aptomat – voltage stabilizer to protect the machine from damage due to too weak voltage.
  • Place the device in a cool, dry place to avoid electricity leakage.
  • Immediately report to the nearest Service Center for timely handling.

Máy giặt báo lỗi EHO

Washing machine error E20

E20 error cause:

  • The amount of clothes in the drum is not spread evenly.
  • The drain hose is pressed or twisted, making it impossible for the water in the drum to escape.
  • The drain pump is clogged.

With this E20 error you should:

  • Press the Start/Past button to stop the machine, check and spread the clothes evenly in the washing machine by hand.
  • Check to see if the exhaust pipe is twisted or not.
  • If the device still does not work, you should call the hotline of the Service Center for quick support.

Máy giặt báo lỗi E20

Above, we have reviewed a few error codes that often appear on the Electrolux washing machine control panel. Hope you get more useful information.

The post https://meo.tips/using/some-common-error-codes-in-electrolux-washing-machines-and-how-to-fix-them/ appeared first on Meo.tips.

View more from Meo.tips:

The West has a strange fruit with a bad skin but an unforgettable taste
How many clothes should be put in the washing machine? The easiest way to estimate the volume of dry clothes
How to make a unique and impressive paper flower as a gift on March 8
Good tips to use betel leaves to treat underarm odor, both cheap and effective
7 reusable household items that we often throw away
9 ways to dry sports shoes quickly and effectively
Things to know about energy-saving energy labels when shopping
Getting caught in the rain should not be underestimated
Why should you soak your feet in hot water?
Pocket 7 tips to collect debt gracefully, effectively, smartly and skillfully during Tet holiday
The CEO of Levi's hasn't washed jeans in 10 years, so how often does he wash jeans?
Soak anise with white vinegar, bring many unexpected uses
How to make some homemade hair masks for dry, tangled hair
Treat acne quickly with ingredients available at home
Should I turn on a large or small fan to save electricity?
Meaning of symbols on clothing labels
How to effectively repel flies, ants, cockroaches and some indoor insects
Treat long-standing dark circles with familiar vegetables at home
Poisonous foods you should know
3 ways to make simple, easy-to-follow 3D handmade cards for March 8

Nhận xét

Đăng nhận xét

Bài đăng phổ biến từ blog này

Why are there 2 flush buttons on a toilet?

Hình ảnh
In the past, the water tank of the toilet had only one flush button, then a parallel type with two flush buttons appeared and now, this type is more popular. Why are there 2 flush buttons on the toilet and what are their different uses that not everyone knows about? Why are there 2 flush buttons on the toilet? The flush button on the water tank of the toilet is where we will press after using the toilet to release water, flush waste. Many people do not understand the purpose of this design so they often press both buttons at the same time. In fact, manufacturers made two toilet flush buttons to create two water-flushing modes to adjust the amount of water used. Pressing the smaller button, the released water volume will be less (half of the tank, usually 3 liters), suitable for urinating. But if you press the larger button, all the stored water in the tank will be flushed (usually about 6 liters). So what happens if you press both buttons at the same time? At this time, the device ...
Đọc thêm

When buying carrots, look at this point, choose the right fresh and firm carrots.

Hình ảnh
Beets are a common food in meals. Winter is the season for beets, but many people don’t know how to choose the right beets, such as soft or black inside, or beets that have been kept for too long and are no longer fresh. When buying beets, many people have a preference for choosing large and white beets, but that is not a good choice. Large beets are more likely to be soft and may be imported beets. Therefore, when choosing, you should pay attention to the following: Look at the leaves When beets are sold at the market, the top part with the leaves is usually cut off, leaving only a few green stems close to the beet. But if you look closely at the young leaves close to the beet, you will be able to tell if it is a fresh or old beet. Fresh beets have leaves that are still fresh and not crushed. Avoid large beets When buying beets, the most important thing to avoid is choosing the largest beet to buy. Typically, larger beets will allow the body to meet its nutritional needs dur...
Đọc thêm

What are USB 3.0 and USB 2.0 connections? How to distinguish?

Hình ảnh
What is USB 3.0 and USB 2.0? USB (Universal Serial Bus) is a very popular connection standard that allows direct connection to peripheral devices such as keyboards, mobile devices, etc. The difference between USB 3.0 and USB 2.0 standards is the transfer rate and amperage. Released in 2009, devices that are compatible with the USB 3.0 standard can achieve speeds up to 10 times that of USB 2.0. The USB 3.0 standard can be backward compatible with USB 2.0, which means you can plug a standard USB 3.0 into a USB 2.0 port on a laptop for normal use, but the speed is limited. Therefore, both devices connected to each other must have the same USB 3.0 standard to achieve the highest speed. Quick comparison of USB 3.0 and USB 2.0 USB 2.0 and USB 3.0 port types USB 2.0 or USB 3.0 is a data transfer protocol while or MicroUSB is a connection type, classified as follows: How to distinguish USB 2.0 and 3.0 ports? There are a few common ways that you can easily tell the difference ...
Đọc thêm